查看“Renegade Project移植指南”的源代码

=Linux=
----
==内核 cmdline ==
=== 必要参数 <ref>https://renegade-doc.readthedocs.io/zh-cn/latest/linux/cmdline.html#id1</ref>===
 pd_ignore_unused clk_ignore_unused efi=novamap 

* <code>pd_ignore_unused</code>

保持所有已由引导加载程序启用的电源域处于打开状态，即使没有驱动程序声明它们。

* <code>clk_ignore_unused</code>

即使没有驱动程序认领启动时钟，也要保持启动时钟开启。

* <code>efi=novamap</code>

在ExitBootServices（）之后未调用SetVirtualAddressMap（）

== 可选参数 <ref>https://renegade-doc.readthedocs.io/zh-cn/latest/linux/cmdline.html#id2</ref>==
 earlycon=efifb,mem video=efifb:off debug panic=10

* <code>earlycon=efifb,mem</code>

启用EFI帧缓冲区上的早期内核消息输出。非常有用，建议用于早期内核调试。

* <code>video=efifb:off</code>

禁用efifb帧缓冲区。由于未知原因，efifb严重影响了我手机的性能。禁用它可以提高性能。除非您有其他fb，例如simplefb，否则不要禁用
=Windows=
----
==适配触摸屏<ref>https://renegade-doc.readthedocs.io/zh-cn/latest/windows/touch.html#id1</ref>==
''首先，您需要确保您的DSDT表不是很坏，并且qcep等核心驱动程序能够正确加载。''

DSDT中的以下部分演示了如何在Oneplus 6t上实现Synaptics触摸。

===TSC1 Part<ref>https://renegade-doc.readthedocs.io/zh-cn/latest/windows/touch.html#tsc1-part</ref>===
 
         Scope (\_SB.PEP0)
         {
             Method (LPMX, 0, NotSerialized)
             {
                 Return (LPXC)
             }
 
             Name (LPXC, Package (0x01)
             {
                 Package (0x04)
                 {
                     "DEVICE", 
                     "'''\\'''_SB.TSC1", 
                     Package (0x0B)
                     {
                         "DSTATE", 
                         Zero, 
                         // Enable the 2.8V regulator on LDO28_A
                         Package (0x02)
 						{
 							"PMICVREGVOTE", 
 							Package (0x06)
 							{
 								"PPP_RESOURCE_ID_LDO28_A", 
 								One, 
 								2856000, 
 								One, 
 								0x07, 
 								Zero
 							}
 						},
 						// Delay 10ms
                         Package (0x02)
                         {
                             "DELAY", 
                             Package (0x01)
                             {
                                 10000
                             }
                         }, 
                         // enable the v1p8 GPIO
                         Package (0x02)
                         {
                             "TLMMGPIO", 
                             Package (0x06)
                             {
                                 88, 
                                 One, 
                                 Zero, 
                                 One, 
                                 Zero, 
                                 Zero
                             }
                         }, 
 						// enable the 2v8 GPIO
 						// '''not''' actually a thing on fajita
 						// no 1v8 i2c regulator either
 						
 						// sleep 10ms
                         Package (0x02)
                         {
                             "DELAY", 
                             Package (0x01)
                             {
                                 10000
                             }
                         }, 
 
 						// reset the device
 						Package (0x02)
                         {
                             "TLMMGPIO", 
                             Package (0x06)
                             {
                                 99, 
                                 One, 
                                 Zero, 
                                 One, 
                                 Zero, 
                                 Zero
                             }
                         }, 
                         
 						// sleep 10ms
                         Package (0x02)
                         {
                             "DELAY", 
                             Package (0x01)
                             {
                                 10000
                             }
                         }, 
                         
 						Package (0x02)
                         {
                             "TLMMGPIO", 
                             Package (0x06)
                             {
                                 99, 
                                 Zero, 
                                 Zero, 
                                 One, 
                                 Zero, 
                                 Zero
                             }
                         }, 
                         
                         Package (0x02)
                         {
                             "DELAY", 
                             Package (0x01)
                             {
                                 10000
                             }
                         }, 
                         
 						Package (0x02)
                         {
                             "TLMMGPIO", 
                             Package (0x06)
                             {
                                 99, 
                                 One, 
                                 Zero, 
                                 One, 
                                 Zero, 
                                 Zero
                             }
                         }, 
                     }, 
 
                     Package (0x04)
                     {
                         "DSTATE", 
                         0x03, 
 						Package (0x02)
                         {
 							// set reset low
                             "TLMMGPIO", 
                             Package (0x06)
                             {
                                 99, 
                                 Zero, 
                                 Zero, 
                                 One, 
                                 Zero, 
                                 Zero
                             },                            
                         },
                         
                         // set v1p8 low
 						Package (0x02)
                         {
 							// set reset low
                             "TLMMGPIO", 
                             Package (0x06)
                             {
                                 88, 
                                 Zero, 
                                 Zero, 
                                 One, 
                                 Zero, 
                                 Zero
                             },                            
                         },
                     }
                 }
             })
         }

 
         Device (TSC1)
         {
             Name (_HID, "MSHW1003")  // _HID: Hardware ID
             Name (_UID, One)  // _UID: Unique ID
             Name (_DEP, Package (0x03)  // _DEP: Dependencies
             {
                 \_SB.PEP0,
                 \_SB.GIO0, 
                 \_SB.IC13
             })
             Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
             {
                 Name (RBUF, ResourceTemplate ()
                 {
                     I2cSerialBusV2 (0x0020, ControllerInitiated, 0x00061A80,
                         AddressingMode7Bit, "'''\\'''_SB.IC13",
                         0x00, ResourceConsumer, , Exclusive,
                         )
                     GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullUp, 0x0000,
                         "'''\\'''_SB.GIO0", 0x00, ResourceConsumer, ,
                         )
                         {   // Pin list
                             0x007D
                         }
                     GpioIo (Exclusive, PullNone, 0x0000, 0x0000, IoRestrictionNone,
                         "'''\\'''_SB.GIO0", 0x00, ResourceConsumer, ,
                         )
                         {   // Pin list
                             0x0063
                         }
                 })
                 Return (RBUF) /* \_SB_.TSC1._CRS.RBUF */
             }
             
 
             Name (PGID, Buffer (0x0A)
             {
                 "'''\\'''_SB.TSC1"
             })
             Name (DBUF, Buffer (DBFL){})
             CreateByteField (DBUF, Zero, STAT)
             CreateByteField (DBUF, 0x02, DVAL)
             CreateField (DBUF, 0x18, 0xA0, DEID)
             Method (_S1D, 0, NotSerialized)  // _S1D: S1 Device State
             {
                 Return (0x03)
             }
 
             Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
             {
                 Return (0x03)
             }
 
             Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
             {
                 Return (0x03)
             }
 
             Method (_PS0, 0, NotSerialized)  // _PS0: Power State 0
             {
                 DEID = Buffer (ESNL){}
                 DVAL = Zero
                 DEID = PGID /* \_SB_.TSC1.PGID */
                 If (\_SB.ABD.AVBL)
                 {
                     \_SB.PEP0.FLD0 = DBUF /* \_SB_.TSC1.DBUF */
                 }
             }
 
             Method (_PS3, 0, NotSerialized)  // _PS3: Power State 3
             {
                 DEID = Buffer (ESNL){}
                 DVAL = 0x03
                 DEID = PGID /* \_SB_.TSC1.PGID */
                 If (\_SB.ABD.AVBL)
                 {
                     \_SB.PEP0.FLD0 = DBUF /* \_SB_.TSC1.DBUF */
                 }
             }
         }

=== I2C Part <ref>https://renegade-doc.readthedocs.io/zh-cn/latest/windows/touch.html#i2c-part</ref>===
 
         Device (IC13)
         {
             Name (_HID, "QCOM0220")  // _HID: Hardware ID
             Alias (\_SB.PSUB, _SUB)
             Name (_UID, 0x0D)  // _UID: Unique ID
             Name (_DEP, Package (0x01)  // _DEP: Dependencies
             {
                 \_SB.PEP0
             })
             Name (_CCA, Zero)  // _CCA: Cache Coherency Attribute
             Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
             {
                 Name (RBUF, ResourceTemplate ()
                 {
                     Memory32Fixed (ReadWrite,
                         0x00A90000,         // Address Base
                         0x00004000,         // Address Length
                         )
                     Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
                     {
                         0x00000185,
                     }
                 })
                 Return (RBUF) /* \_SB_.IC13._CRS.RBUF */
             }
         }
=[[Renegade-Project-EDK2|EDK2]]=